Are you ready to boost your home’s security with the latest Ring Video Doorbell 2020 release? Installing this smart device might seem tricky, but with the right steps, you can have it up and running quickly.
Imagine seeing who’s at your door from anywhere, anytime — all from your phone. In this guide, you’ll discover easy, clear instructions that make installation simple, even if you’re not a tech expert. Keep reading, and by the end, you’ll have your Ring Video Doorbell set up and protecting your home like a pro.
Unbox And Check Components
Unboxing the Ring Video Doorbell 2020 is the first step to a smooth installation. This step helps you confirm all needed parts are ready. It also gives a first look at the device and accessories.
Take your time. Carefully open the box and handle each component. Check the list of items to avoid missing anything important.
Unpack The Doorbell Device
Remove the main doorbell unit from the box. Hold it gently to avoid scratches or damage. Check the front camera lens and buttons for any defects.
Notice the back of the doorbell. This is where the mounting bracket attaches. Make sure the contacts and screws are intact.
Locate The Mounting Bracket And Screws
Find the mounting bracket inside the box. It is a small metal or plastic piece. This bracket holds the doorbell on your wall.
Also, find the screws and anchors. These are needed to fix the bracket firmly. Count the screws to ensure you have the right number.
Check The Power Options
Look for the battery pack or power adapter. The 2020 model usually comes with a rechargeable battery. Confirm that the battery is included and charged.
Some kits may also have a power cable. Verify if your model uses it or not. This detail helps you prepare for wiring or charging.
Review Included Tools And Manuals
Check for a small screwdriver or other tools. These help with installation if you don’t have your own. Also, find the user manual and quick start guide.
Read the manual before installing. It has important safety and setup tips. Keep it nearby during installation for reference.
Charge The Doorbell Battery
Charging the Ring Video Doorbell battery is a crucial step before installing the device. A fully charged battery ensures the doorbell works properly and lasts longer. This section explains how to charge the battery safely and quickly.
Remove The Battery From The Doorbell
Start by pressing the small button on the side of the doorbell. Pull the battery out gently. Do not force it. Keep the battery away from water and dirt.
Connect The Battery To The Charger
Use the USB charging cable included with your Ring Doorbell. Plug the small end into the battery port. Connect the other end to a USB power source. A wall charger or computer USB port works well.
Wait For The Battery To Fully Charge
The battery light will show the charging status. A red light means charging. A green light means fully charged. Charging usually takes 5 to 10 hours. Avoid using the battery until it is fully charged.
Download Ring App
Downloading the Ring app is the first step to setting up your Ring Video Doorbell 2020. The app connects your doorbell to your smartphone. It lets you control and monitor your device easily. Without the app, your doorbell cannot work properly.
The app is free and works on both iOS and Android devices. It offers a simple way to set up your doorbell. It also sends alerts when someone rings or moves near your door. Follow the steps below to download and install the app.
Download The Ring App From The App Store
Open the App Store on your iPhone or iPad. Tap the search bar and type “Ring.” Find the official Ring app by Ring.com. Tap the download button to install it. Wait for the app to finish downloading.
Download The Ring App From Google Play
On your Android phone or tablet, open Google Play. Use the search bar to type “Ring.” Select the Ring app from the results. Tap “Install” and wait for the app to download. Once done, open the app to start setup.
Set Up Your Ring Account
Open the Ring app after installation. Tap “Create Account” to sign up. Enter your email and create a password. Follow the prompts to verify your information. Your account will link your Ring devices securely.
Create Or Log Into Account
Start by creating a new account or logging into your existing Ring account. This step lets you connect your Ring Video Doorbell and control it easily. Access your device settings and manage notifications quickly through the app.
Create A New Ring Account
Start by downloading the Ring app from your phone’s app store. Open the app and tap “Create Account.” Enter your email address and create a strong password. Make sure your password has at least six characters. Next, provide your phone number for security purposes. Accept the terms and privacy policy to continue. After this, you will receive a verification code. Enter the code in the app to verify your account. Your new Ring account is now ready to use.
Log Into An Existing Account
If you already have a Ring account, open the Ring app. Tap the “Log In” button on the home screen. Enter your registered email address and password carefully. Tap “Log In” to access your account. If you forget your password, use the “Forgot Password” link. Follow the instructions to reset it via email. Logging into your account allows you to connect your doorbell and manage settings easily.
Set Up Device In App
Setting up your Ring Video Doorbell in the app is the next important step. This process connects your device to your home network. It allows you to control the doorbell and see who is at your door. Follow each step carefully to ensure a smooth setup.
Scan Qr Code
Open the Ring app on your smartphone. The app will ask you to scan the QR code. Find this code on the back of your doorbell or inside the packaging. Hold your phone’s camera over the QR code. The app will recognize your device automatically. This step links your doorbell to your app account. It also helps the app find your device on the network.
Connect To Wifi
After scanning, the app asks you to connect to WiFi. Choose your home WiFi network from the list. Enter your WiFi password carefully. The doorbell needs a strong WiFi signal to work well. The app will then connect the doorbell to your network. Wait a few moments for the connection to complete. Your Ring Video Doorbell is now ready to use with your app.
Choose Installation Location
Choosing the right spot for your Ring Video Doorbell is key. It affects how well it works and what it can see. Take time to find the best place. Consider height and WiFi signal. These factors help the doorbell perform well and keep your home safe.
Optimal Height
Install the doorbell about 48 inches from the ground. This height matches most people’s eye level. It helps the camera capture faces clearly. Avoid placing it too high or too low. Too high misses faces; too low may catch feet.
Wifi Signal Check
Strong WiFi is crucial for the doorbell to work smoothly. Test the WiFi signal near the door. Use a phone or laptop to check signal strength. If the signal is weak, move your router closer or use a WiFi extender. A steady connection ensures video and alerts work without delay.
Mount The Doorbell
Mounting the Ring Video Doorbell is a key step in your installation process. It ensures your device stays secure and works correctly. Follow these simple steps to mount it firmly and safely on your wall or door frame.
Mark Drill Points
Hold the mounting bracket against the wall where you want to place the doorbell. Use a pencil to mark the holes on the wall. Double-check the marks to ensure the bracket will be level.
Drill Holes And Insert Anchors
Use a drill to create holes on the marked points. The holes should match the size of the wall anchors. Push the anchors into the drilled holes until they fit tight.
Attach Mounting Bracket
Place the mounting bracket over the holes with anchors. Use the screws provided to fix the bracket to the wall. Tighten the screws firmly, but avoid over-tightening.
Secure Doorbell
Align the Ring Video Doorbell with the mounting bracket. Slide the doorbell down until it clicks into place. Use the security screws to lock the doorbell and prevent removal.
Connect To Existing Doorbell Wiring
Connecting your Ring Video Doorbell to existing doorbell wiring saves time and keeps your setup clean. It uses the power from your current doorbell system. This way, you avoid changing your home’s electrical setup. Follow these steps carefully for a safe and smooth installation.
Turn Off Power
Start by turning off power at your home’s circuit breaker. This stops any electric shock risk. Use a voltage tester on your doorbell wires to confirm no power flows. Safety first. Never work with live wires.
Remove Old Doorbell
Unscrew the old doorbell from the wall. Gently pull it away to expose the wires. Take note of how the wires connect. Disconnect the wires by loosening the screws. Keep the wires safe and separated.
Attach Wires To Ring Doorbell
Connect the existing wires to the two screws on the back of the Ring doorbell. Polarity does not matter here. Tighten the screws to hold the wires firmly. Mount the Ring doorbell on the wall bracket. Turn the power back on and test your setup.
Test The Device
Testing your Ring Video Doorbell after installation is important. It ensures the device works properly and keeps your home secure. Take some time to check all functions. This helps avoid problems later. Follow the steps below to test your device fully.
Check Live Video
Open the Ring app on your phone. Tap the live view button to see the video feed. Make sure the image is clear and shows the door area. Check the video in different lighting conditions. This confirms the camera works day and night. Adjust the angle if the view is blocked or unclear.
Test Doorbell Button
Press the doorbell button on the device. Listen for the chime inside your home. The sound should be loud and clear. Ask someone to press the button while you watch the live video. Confirm the button triggers the alert immediately. This proves the button and connection function well.
Verify Notifications
Check your phone for notifications from the Ring app. These alerts notify you when someone rings the doorbell or moves near it. Test notifications by pressing the doorbell and moving in front of the camera. Ensure notifications arrive without delay. This keeps you informed about visitors or activity at your door.
Credit: www.amazon.com
Adjust Settings For Best Performance
Adjusting the settings of your Ring Video Doorbell 2020 helps you get the best results. Proper settings reduce false alerts and ensure you see important events. This makes your doorbell more useful and less annoying. Take time to set up motion and notification options carefully.
Motion Sensitivity
Motion sensitivity controls how much movement triggers alerts. Set it too high, and you get many false alarms. Set it too low, and you might miss visitors. Find a balance that suits your home’s environment. Use the Ring app to adjust the slider. Test different levels until alerts match real activity.
Notification Preferences
Choose when and how you receive alerts from your doorbell. You can get notifications on your phone or tablet. Turn off alerts during certain times to avoid disturbance. Customize alerts for different event types, like motion or doorbell press. This helps you stay informed without getting overwhelmed.
Troubleshoot Common Issues
Installing the Ring Video Doorbell 2020 is simple, but some issues may arise. Troubleshooting helps fix common problems fast. This section covers key troubles and easy fixes.
Wifi Connectivity
WiFi issues are common with video doorbells. Check your router is on and working. Make sure the doorbell is within WiFi range. Walls and distance can block signals. Restart your router and doorbell to refresh the connection. Use the Ring app to run a network test. Switching to a 2.4 GHz WiFi band often improves connection.
Power Problems
Power supply is crucial for your Ring doorbell. Check if the battery is charged or the wiring is correct. For wired models, turn off power before checking wires. Loose or damaged wires cause failures. Replace or tighten connections if needed. Battery models need regular charging. Use the Ring app to check battery status. A low battery causes the doorbell to stop working.
App Errors
The Ring app controls your doorbell. Errors may block live view or notifications. Close and reopen the app to reset it. Update the app to the latest version. Clear the app cache or reinstall if problems persist. Check your phone’s internet connection. Allow necessary permissions for the app. Sometimes, logging out and back in solves app issues.
Credit: www.newegg.com
Credit: proctovasc.com.br
Frequently Asked Questions
How Do I Install The Ring Video Doorbell 2020?
First, charge your Ring Doorbell fully. Next, connect it to Wi-Fi. Finally, mount it using the included tools and screws. Follow the app instructions for setup.
What Tools Are Needed For Installation?
You will need a drill, screwdriver, and the mounting kit included in the box. No special tools are required beyond these basics.
Can I Install The Ring Doorbell Without Wiring?
Yes, the 2020 Ring Doorbell supports battery operation. Simply charge the battery and mount the device without connecting to existing doorbell wires.
How Do I Connect The Ring Doorbell To Wi-fi?
Open the Ring app, select your device, and follow the on-screen prompts to join your home Wi-Fi network easily.
Conclusion
Installing the Ring Video Doorbell 2020 is simple and quick. Follow each step carefully to avoid mistakes. Test your doorbell after installation to ensure it works well. Enjoy the added security and convenience it brings to your home. Regularly check the device for updates and maintenance.
Stay safe and connected with your visitors anytime. This setup helps you watch your front door easily. A small effort for big peace of mind.
